2/24/2007
I am not sure if I logged this previously but the location for the remote compass sensor wasn't working. I had it on the HS deck and every time I move the stock forward and backward the compass reading would move 10 degrees. My new location is in front of a bulkhead behind the canopy. I made a bracket which I will attach to the top skin. I first made on out of paper and then the real thing out of the scrap I cut out for the front baggage door.
On the rudder fairing, I drilled out three rivets along the lower longeron. After some fitting I drilled the rudder fairing to the fuselage. I then dimpled, countersunk, etc., and then primed.
I also installed nut plates for the front of the HS fairing and drilled and tapped the holes in the longeron.
