2/7/2006
A very kind person noticed on my web site that the forward skins were on the wrong sides. I removed the skins, deburred them and put them on the correct sides (NACA vent on the left!). While I had them off, I took all of the front off including the firewall and fixed a firewall to weldment rivet that didn't turn out very well. I also took the front F-804 off and bolted and riveted the F-804D andles which I had missed earlier.
I deburred and clecoed everything back into place. I am not too happy with how the longeron meets up with F-804. The longeron isn't following the skin contour. I think if I put in a slight twist between F-804 and the cabin rear bulkhead it should take care of it. I'll decide tomorrow. It's late.